Events and Webinars

 
Filter
Tradeshow
In person event

Exhibitor: InnovMetric
Booth: 1320

Rosemont, USA
October 26, 2021
Tradeshow
In person event

Exhibitor : Polyworks Scandinavia
Booth : B03120

Jönköping, Sweden
November 9, 2021
Tradeshow
In person event

Exhibitor: PolyWorks Japan 
Booth: 48

Yokohama, Japan
November 11, 2021
Tradeshow
In person event

Exhibitor:  PolyWorks Europa
Booth: 5H04

Madrid, Spain
November 17, 2021
Recorded webinar

To obtain trustworthy results, a measurement system analysis (MSA) is performed prior to production through repeatability and Gauge R&R studies. InnovMetric proposes an easy-to-use and fully integrated software solution to perform these studies.

Recorded webinar

Managing 3D measurement data is a major challenge. The growing popularity of 3D scanning technologies yields large inspection projects. Discover how you can achieve substantial daily productivity gains by using PolyWorks|DataLoop™.

Recorded webinar

When a part is inspected with the help of its CAD model, the CAD model is used throughout the project to align the part, extract features, and produce pass/fail results. When inspecting a part by scanning without using a CAD model, you go through those same steps obtaining measured-to-nominal deviations but using a different toolset.  

Recorded webinar

With the introduction of PolyWorks|ReportLoop™, a free Excel-based smart reporting solution, you can link spreadsheet cells directly to PolyWorks® inspection project data.

Recorded webinar

Inspecting a part in PolyWorks|Inspector™ with the support of a CAD model is not always an option. While using CAD models is a very efficient way of getting the nominal geometry required for performing an alignment, obtaining measurement deviations, and driving measurement guidance, when they are not available you can perform part inspection just as well. 

Recorded webinar

With PolyWorks|Modeler™ Light, quickly clean up surfaces, optimize the size of a model while preserving its topology and dimensional accuracy, and rapidly calculate volume and surface area.

Recorded webinar

Whether you need to get a complete coverage of your part while scanning, or simply reach measurements that are beyond the range of your device, combining data from multiple part/device setups is a common task for metrologists. PolyWorks|Inspector™ offers a complete set of tools to efficiently and accurately combine data acquired from multiple device positions.

Recorded webinar

When facing complex metrology challenges, metrology specialists often develop in-house, proprietary measurement techniques that require documentation and support within their company. These measurement techniques can now be implemented directly within PolyWorks|Inspector™.

Recorded webinar

Creating CNC CMM sequences for projects containing a large number of measurement objects is typically a long process, involving repetitive tasks such as defining tool orientations, avoiding collisions, and finding the optimal object measurement order. PolyWorks|Inspector™ now offers an interactive sequence creation mode that assists users throughout the process.

Recorded webinar

Custom bent tube and rod forms need to be measured to conform to the design callout from engineering drawings or tables. In addition, there is a need to document tubes and rods that have been created in the field, or highly modified for fit and function, as 3D models that can be imported into CAD software. Both the measurement and the CAD-creation operations can be realized easily using the free PolyWorks|Inspector™ macro, IMTube.

Recorded webinar

Inspecting thin parts made of sheet metal, plastic, or composite material poses a variety of challenges, whether you are using touch-probing or noncontact digitizing measurement tools. PolyWorks® offers a set of tools that facilitate thin part inspection as well as an application mode that presets values so your measurements are made with optimal parameters.

Recorded webinar

With PolyWorks|Inspector™, you can easily avoid costly equipment damage by detecting and fixing potential collisions between the moving parts of a CNC CMM, the measured part, and its fixture when creating or editing a measurement sequence.

Recorded webinar

Datum target areas let you properly simulate the way an inspection fixture would hold the part wherever a spherical or pointed pin would be inadequate.

Recorded webinar

When elaborating a multi-piece inspection performed using a measurement sequence, there may be manual tasks that are in danger of being forgotten, such as saving a formatted report to disk in PDF format. You can easily add simple macro scripts to a measurement sequence to perform those tasks, making your inspection process more robust and efficient!

Recorded webinar

When working in PolyWorks|Modeler™, you can leverage many tools in PolyWorks|Inspector™ to perform a larger variety of reverse-engineering tasks more efficiently.

Recorded webinar

A part that is symmetrical can be aligned by using features that describe a center line. If the part has no such features, it is also possible to align the part using an imaginary symmetry line that is exactly derived by obtaining equal deviations on opposing sides of the part.

Recorded webinar

In a manufacturing environment, having metrology devices already in use or undergoing maintenance or calibration may create troublesome inspection bottlenecks. By creating piece templates for all your metrology devices, you gain the flexibility to perform your inspection using whichever device is available. 

Recorded webinar

In this live webinar, you will discover how PolyWorks|Inspector™ flush & gap gauges can be used not only to perform measurements, but also to find the optimal component placement in an assembly that ensures that gauge measurements remain within specified control tolerances.